Thursday, October 23, 2014

Underway Daily Routine

We had my first Training Board meeting a few days before we got underway, to plan our training for the patrol. The Department Heads were very patient in explaining to me the typical underway training schedule. It went something like this (acronyms explained below; pipes included in the schedule):

0800 - 1000 M/W/F - BECCEs: "Now, commence unrestricted BECCEs. Place all sensitive electronic equipment in standby. Limit phone calls to Main Control."
0800 - 1000ish T/R - DCPO Day and Small Boat training
0800-0930 M/T/W/R/F - Personal development time
0800 Sat - Field Day of common spaces and work areas
0945 M/W/F - DCTT brief
1000 Sat - Materiel Inspection
1015 M/W/F - DCTT drill (doesn't start until 1015 so the midwatch (midnight to 0400 watch) can sleep until 1000 and actually get a couple hours of uninterrupted rest): There's a super long pipe that goes along with setting the training environment so that everybody knows what to do in the event of an actual casualty (v. just a training team imposed casualty), what a safety time out is, and what a training time out is. The end of drill is piped as, "Now, secure from drill. Stow all gear."
1130-1230 everyday - noon meal
1250 T/R/S - Officers' Call: "Now, officers' call, officers' call. Quarters will be held at fair (on the flight deck)/foul (on the messdeck) weather parade."
1300 T/R/S - Quarters: "Now, all hands to quarters."
1315 T/R - LE training
1530 everyday - Sweepers: "Now, knock off ship's work. Sweepers, sweepers, man your brooms. Give the ship a good sweep down. Take all trash to the receptacles on the starboard main deck. Now, sweepers."
1530 everyday - DCPQS training
1645 everyday - evening meal for watch reliefs and 1st Class Petty Officers, "watch reliefs to the head of the line"
1700 everyday - evening meal for all hands
1830 everyday (or at least most days, because I can't seem to remember to take it off the POD (Plan of the Day) even when we're not supposed to have it...and if something is on the POD, it happens...yeah, right!) - OPS Brief
1845 everyday - Evening Reports: "Now, 1845, lay before the mast all evening reports. Departmental representatives muster in the wardroom."

BECCEs: Basic Engineering Casualty Control Exercises, pronounced beckies...one of my more favorite acronyms, where the Engineering Casualty Control Training Team (ECCTT = ee-set) runs engine room watchstanders through a variety of potential casualties, like a uncontrollable hot bearing or loss of l/o (lube oil) pressure on the NR1 MRG (number 1 (starboard side) main reduction gear))

DCPO: Damage Control Petty Officer

Personal development time: just what it sounds like...if you don't have somewhere else to be with all the training going on, you can use the time to work on something productive, from fitness to watchstanding quals to advancement requirements...sometimes even to sleep if the days have been extra full.

Field Day: Deep cleaning (as opposed to Sweepers)

DCTT: Damage Control Training Team (pronounced de-set), coordinates the damage control training like major flooding, fire or other calamity onboard

Officers' Call: When the Chiefs and Officers have a little powwow to pass information before going out in front of everybody.

Quarters: All hands gatherings; used to pass items of interest to most, if not all hands. Awards/recognitions are typical, as are drill debriefs, where we talk about recent training events.

LE training: Law Enforcement training...gotta keep those Boarding Officers (BOs) and Boarding Team Members (BTMs) proficient and certified.

DCPQS training: Damage Control Personnel Qualification Standard -- how we learn about all the DC tools/systems/equipment we have onboard and how to use them safely and effectively to combat damage to the ship.

Evening Reports: Accountability check, making sure we still have all hands onboard. But, it usually turns into a mini-Department Head meeting with taskers flying around, deconflicting the next day's POD and sharing any other pertinent information that's useful for cross-departmental purposes.

Once the Department Heads ran me through what all was in the training schedule, I kinda looked around and said, well, that should keep us busy. When do we do operations?

Everybody laughed. Of course, I knew the answer -- operations always comes first. If we have a case, that takes precedence over training.

Though I have seen a true commitment on this ship to multi-tasking. We did a couple of fisheries boardings on the way down to our op area, and once the boarding team was away on the small boat, unrestricted BECCEs commenced iaw (in accordance with) the POD. Hadn't seen that before, but it's a realistic situation...how else do you know how to combat a casualty when your boarding team is on another boat?

There are lots of other random items thrown in the POD also. Flight ops when we have a helo onboard; Morale Committee meetings; Navigation Briefs the evening before we pull into a port; all hands medical training; lately we've been doing two sets of BECCEs some days, to provide break-in engineers with the opportunities to get qualified at their watchstations; LDAC (Leadership and Diversity Advisory Committee) meetings; and whatever other fun stuff might come up.

Stuffing all these events into the POD makes for some very full days. But we're not underway to sit around playing video games and watching movies! :)

The weeks have been busy since we pulled into port the last time. Lots of chasing "hot intel," and training and meetings and departmental work when the intel turned out to be luke warm at best. We've done one boarding. It took 50 hours. Everyone was a little wore out after that. I was one of the lucky ones that actually got to sleep for a few hours overnight, so my internal clock stayed pretty much on track. The CO, OPS (LCDR Jim Pafford) and the Boarding Officer, ME2 Craig Miller...not so much. All three of them were up for about 30 hours straight. We did our best to swap people out and make sure they had the opportunity to sleep and recover, but there are just some functions that have to be maintained during an operation.

We did a hot wash (debrief/discussion of the pros/cons/lessons learned) a few days later, once everyone had recovered. Comms can always be improved; the teamwork was strong and definitely contributed to the smoothness of the boarding; the plan needed to be more of a work in progress, with specific missions defined at each step that then determined who needed to be involved on the boat being boarded. Some suggestions for additional training were noted. We didn't find anything illegal onboard, but we got permission to turn the boat over to the destination country so they could do a more thorough inspection at the pier once the cargo had been offloaded. Not a total victory, but also not a full defeat.

And in the meantime, people have been getting **QUALIFIED!!** I think the list might be even longer this time! Congratulations to everyone who earned a qualification this leg. You're making the ship more capable with each and every qualification! Here goes the list:

Engineering Type Watches (or at least submitted by EO, LCDR Todd Devries):
Auxiliary Watch Stander: EM2 Tony Bennett
Throttle: ENS Johnny Upton; EMC Walter Evans; MKC Jason Newby; MK1 Bobby Messick; DC1 Jeremy Salinas; MK3 Charles Murray
EOW (Engineering Officer of the Watch -- the highest engineer watch, in charge of all the engineering plant during the watch): EMC Walter Evans; MK1 Bobby Messick; MK2 Matthew Bowman; EM2 Matthew Ferguson
Basic DCPQS: ENS Johnny Upton; ENS John Benedict; BMC Rob Vanlandingham; SK1 Bismarck Miranda; DC1 Jeremy Salinas; FS3 Billy Shuck; FS3 Cody Frizzelle; SN Josh Shawler
Advanced DCPQS: ENS Johnny Upton; ENS Aaron Corn; EMC Walter Evans; MKC Jason Newby; FS3 Cody Frizzelle
On-Scene Leader (manages the attack team during a damage control scenario (fire/flooding/etc)): EMC Walter Evans
Locker Leader (coordinates repair efforts from the Repair Locker (where all the damage control equipment/gear is stored): FSC Mike Eckstrom

Operations Type Watches (submitted by OPS, LCDR Jim Pafford)
Boarding Officer (BO): ME1 Jason Pratt
CIC Watch (Combat Information Center -- where operations are coordinated; OPS spends a lot of time in here): ME1 Jason Pratt
GPOW (Gangway Petty Officer of the Watch -- the person who you'll see at the quarterdeck when we're inport): IT2 Jason Mansfield
Nav Plot (Navigation plotter -- plots the ship's position in restricted waters (<1 christopher="" div="" from="" jozan="" nbsp="" nm="" shoal="" water="">Bearing Taker (shoots bearings using the alidade to help Nav Plot figure out where the ship is based on visual fixes): FS3 Billy Shuck - Bearing-taker

Support Department Watches (submitted by SUPPO, ENS Joe Smith)
SSW (Safety and Security Watchstander -- inport watch that keeps an eye on things by doing rounds throughout the ship every hour): SK1 Bismarck Miranda 
Lee Helm (works the throttles when we're at special sea detail): SK1 Bismarck Miranda
Inport OOD (CO's direct representative while the ship is inport): FSC Mike Eckstrom

Deck Department Quals (submitted by 1LT, ENS John DeCastra)
Aft Steering (ready to take over steering locally at the rudders if something happens to the steering control system; manned during special sea detail): SA Josh Shawler
Boat Crew: BM2 Christopher Jozan
Coxswain: BMC Rob Vanlandingham
Davit Operator (the davit is what allows us to launch the boat from where it usually rests, secure in the cradle): SN Nick Docherty
Helm and Lookout: SA Robert Morse
Master Helm (more precise helm qual, used during special sea detail, or other evolutions where being even one or two degrees off course could be **really** bad): SN Nick Docherty
Needless to say, there are *a lot* more quals this post! Just goes to prove that we're getting salty! 

1 comment:

Anonymous said...

Thanks, I almost miss being underway on a big white one. CGG Unimak '72-73.